D-Link R9S Guide D'installation Rapide

Quick Installation Guide
R95
BE9500 Wi-Fi 7 Smart Router
Installation Instructions
1
/
Internet
2
/
<3mins
What's in the Box
x1 x1 x 1 x 1
FAQ
Why can't I access the Internet?
Please reset your wireless router, and if it still does not work, please contact
your internet service provider.
What do I do if I forgot my router's login password?
Please reset your wireless router to default settings and set it up again.
How do I restore the router to its factory default settings?
With the router powered on, press the reset button with a paperclip for 1
second and then release it. The R95 will now be at its factory default settings.
How to build a mesh network with ethernet backhaul?
To create a wired Ethernet backhaul connection, simply connect an Ethernet
cable from the LAN port on your Mesh Wi-Fi router to the LAN port on your
Mesh Wi-Fi node. The Status LED will turn solid white once it has finished
pairing with your Mesh Wi-Fi network in a few minutes.
2025/04/16 v1.00(CA)_105x148 4GIR95ZZZDLCA1XX
Option 1
3
/
AQUILA PRO AI
Option 2
3
Wi-Fi Name (SSID): R95-XXXX
/
Wi-Fi password: XXXXXXXXXX
R95
Connect
xxxxxxxxx
xxxxxxxxx
Option 3
3
/
LAN
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
GPL Code Statement
Technical Support
Having trouble installing your new
product? D-Link's website contains
the latest user documentation
and software updates for D-Link
products. Customers can contact
D-Link Technical Support through
our website by choosing the
relevant region.
GPL Source Code Support
https://tsd.dlink.com.tw/GPL
North America
https://support.dlink.com
Setting your R95 up as a Range Extender
4 To pair your devices with R95, follow the steps below.
/
1 Plug in to power on R95 and place it near your
/
wireless router. Wait for R95's LED indicator to start
pulsing orange.
Install New
2 Press the WPS button on the router for 3 seconds.
Device
/
Refer to your router's user manual for router
behavior.
3 Press the WPS button on your R95 for 3 seconds.
/
The LED indicator should start pulsing white.
4
https://xxxx.devicesetup.net/
/
(XXXX represents the last 4
characters of the MAC address)
Admin Password: XXXXXXXXXX
4 When R95's LED indicator turns solid white
/
(may take up to 3 minutes), this indicates R95 is
connected to your wireless router.
You have now completed the setup !
You can move your R95 to any location you want for
wireless coverage. By default, your R95 shares the same
4
https://xxxx.devicesetup.net/ Wi-Fi Name and password of your wireless router.
(XXXX represents the last 4
/
characters of the MAC address)
Admin Password: XXXXXXXXXX
WPS may be disabled on certain routers. If the LED
indicator does not blink after pressing the WPS button,
try again and press it a little longer. If that still does not
work, use AQUILA PRO AI App for setup instead.
Web Management Setup Notice
When you access the web management page of your D-Link device
during installation, your browser may display a security warning stating,
"Your connection isn't private." This is because the device's default
management URL is not an actual Internet website with valid certificates
and the security of the connection to the device is not compromised. You
can proceed with the installation by following these steps:
1. Click the "Advanced" button.
1
2. Click "Continue to the default management URL."
2
Now you will be able to log in to your device.
R95 Overview
7
1 LED ON/OFF button
2 Ethernet port
3 Internet port
RESET button
4
LED status indicators Router mode
Connected to an
Solid white Internet network with
strong signal
Establishing a WPS
Breathing white
connection
Breathing orange Ready for connection
NOTE
Interleaving white/ Undergoing firmware
orange update process
Resetting to factory
Breathing red
default
Solid red Powering on
support.dlink.com
Video Tutorials
Live Chat
Common Questions
https://support.dlink.com
6
1 2 3 4 5
5 Power connector : (12V/4A).
WPS button
6
LED status indicators
7
Extender mode Bridge mode
Connected to a network with Connected to an Internet
strong signal network with strong signal
The uplink connection
between your router and Establishing a WPS
R95 is weak, or the R95 is connection
establishing a WPS connection
Not connected Not connected
Undergoing firmware update Undergoing firmware
process update process
Resetting to factory
Resetting to factory default
default
Powering on Powering on
STOP
Also available
from your
mobile device.