Asm100/110; Description; Block Diagram - Ramiaudio Rgl100 Manuel Utilisateur

DESCRIPTION

ASM100 and ASM110 set is intend to help in wiring ON AIR lights on new microphone stands having
this new feature.
ASM100 interfaces microphone channels GPO, wheter it is loop, voltage open cllector or drain, and
delivers power to the the ON AIR light.
ASM100 is designed to handle up to six GPO outputs and to interface, 6 microphone stands.
The six outputs are fused (thermal) protected with automatic reset.
ASM110 thanks to a screws connector, dispatches the information to each microphone stand.
Wiring between ASM100 and ASM110 use a standard direct RJ45 cable
Connection between ASM110 is omnibus type, using the same net RJ45 cable.
It is possible to connect up to 6 ASM100 on the net.
ASM100 and ASM110 are in small boxes, with Velcro, allowing microphone stand close installation.

BLOCK DIAGRAM

ASM100
Sub-D 25 F
GPI from Mixer
- dry loop
- open collector
- open drain
- floating tension
DC 12 to 24V
To a second card ASM100
Rami - ASM100/110
ASM 100/110
circuit
+
protection
+
+
+
+
0V
+
But you can use a second or
third or more ASM110 if the
distance between all the
microphones is too large.
Screen terminal
RJ45 BUS
You can connect the six
microphones on only one
ASM110.
Screen terminal
To another card ASM110
(6 cards max)
21
1 2 3 4 5 6
for cabling
24V
GND
1 2 3 4 5 6
for cabling
24V
GND
ASM110
ASM110
ENGLISH