Creative WebCam Vista Plus Manuel D'instructions page 5

CLE_WCam Vista Plus QS.book Page 3 Monday, December 20, 2004 12:35 PM
6. When prompted, connect your Creative WebCam's USB cable to an available USB
port on your computer (see Figure 3). Microsoft™ Windows
the device.
In Windows XP only:
i. When the Found New Hardware Wizard dialog box appears, select Install the software
automatically (Recommended), and then click the Next button.
ii. When a Hardware Installation dialog box appears, click the Continue Anyway button.
In Windows 2000 only:
When a Digital Signature Not Found dialog box appears, telling you that your Creative
WebCam has been detected, click the Yes button.
In Windows Me and Windows 98 SE only:
i. If you are prompted to insert the Windows Me or Windows 98 SE CD, replace the Installation
CD with the appropriate CD.
ii. In the Insert Disk dialog box, click the OK button.
7. Follow the instructions on screen to complete the installation. You may be asked, after
the drivers have been successfully installed, if you want to restart your computer.
Select No until all the applications are installed.
8. Restart your computer after all the applications have been installed.
®
USB port
Figure 3
automatically detects
3