Curtis RT068J Manuel Du Propriétaire page 4

VH: set the VHF high channels
UHF: set the UHF all channels
Turn the tuning control until desired band channel appears.
Volume control 4 for both TV & RADIO
Set the desired volume level.
V-Hold control 11
When the picture is overlapping or it moves up or down,
turn the vertical Hold in either direction until the picture is
stabilized.
Brightness Control 13
When the picture is too bright or too dark turn the control
until satisfactory brightness is obtained.
Contrast control 12
When the picture is too bright or too strong, turn the contrast
in either direction until optimum contrast is obtained.
RADIO PROGRAM SECTION
Set switch 2 to RADIO position
Set function switch 3 to either AM or FM position.
Turn the tuning control until desired broadcasting station is
obtained.
CONNECTING AN AUDIO/VIDEO SOURCE
You can use your TV/RADIO to monitor an audio/video
source (such as a VCD, camcorder or video cassette
player). Connect the audio/video source's output jacks to the
AUDIO INPUT and VIDEO INPUT jacks on the back of the
TV/RADIO.
3