LENCO HPB-730 Mode D'emploi page 8

Charging
The headset contains a Micro USB cable that can be connected to your computer or other device made for USB
charging. Please plug the Micro USB end of the included USB cable into the USB micro port charger connector under
the left ear-cap of the headphone, and plug the other end into a USB port on your computer or other devices made
for USB charging. The indicator light will be red while charging. Once fully charged, the indicator light will turn off.
Charge time is 2,5 hours on an empty battery.
The headset is with built-in lithium ion battery. Please charge at least 4 hours before first use.
(Suggestion: Don't use a car charger at first time).
Active Noise Cancelling On:
Hold and Press the ANC button for 1 second. Green LED light will turn on. The ANC function is available in Bluetooth
and also in cable mode.
NOTE: The ANC function can also be used without music.
Active Noise Cancelling Off:
Hold and Press the ANC button for 1 second. Green LED light will turn off.
NOTE: The ANC function can also be used without music.
Phone calls
To answer or end a call, when phone call comes, quickly press MFB to answer it or press and hold MFB about
1.5 seconds to reject the call.
Listen to Music
Connect the headset to phone or compatible Bluetooth devices that support A2DP Bluetooth profile. The available
music functions depend on your Bluetooth devices. If you receive or make a call while listening to music, the music is
paused until the call ends.
Disconnect the headset
To disconnect the headset from your device, switch off the headset, or disconnect the Bluetooth function in your
bluetooth device.
Reconnect the Headset
To reconnect the HPB-730 switch on by pressing the power button for 3 seconds, the HPB-730 will turn on and
automatically connects to the previously connected device. When connected successfully it will prompt "connected".
Passive model
You can use "Lenco HPB-730" as a wired headphone. Simply connect the headset to your MP3 player with 3.5mm
audio cable. Inserting an audio cable plug disables the bluetooth functionality but the ANC function can be used even
without Bluetooth: this can be interesting for long airplane flights.
Caution:
1. Long time use of the headphone at high volume level can damage your hearing. If tinnitus occurs, please turn the
volume down or stop playing. Never turn the volume up too much at once: turn the volume up slowly. Do not use
the headset in "dangerous" places or in places where you should be able to listen to the outside world like in traffic,
8