aldes 11023226 Notice De Montage Et D'utilisation page 22

Menus
5, 6 et 7 :
Adjusting
time periods
for fan speed
Speed 1
Menu 8:
Activate auto-
matic night
overventilation
(Auto Boost)
Menu 9:
Adjust thermal
comfort tem-
perature
Menu 10:
Set filter
replacement
interval
Menu 11:
Reset to factory
settings
Menu 12
(optional):
Activate ther-
mostat
Speed 3 Speed 4
Speed 1
Note: Once the time period has ended, the system will return to the initial
fan speed.
Note: No. 2 speed setting cannot be controlled with a timer..
Select Yes to activate
When the temperature conditions enable optimal cooling of your home
(especially during cool summer nights), the fan speed setting 4 (BOOST) will
automatically be activated with the bypass damper open.
Note: Select the
Set desired interior temperature for enhanced comfort in
summer months.
Threshold setting to enable optimal control of bypass damper.
Adjust filter replacement interval
Depending on your local environment, pollution will clog your filters at varying
speeds. You need to replace the filters regularly to ensure the system operates
efficiently.
Select Yes to reset the remote control to factory settings.
The remote control unit will nonetheless still keep its connec-
tion to the HRV system.
Only available if 1 to 3 Aldes Ubio heating modules are connected to the Bus
terminal block on the HRV system and if at least one channel on a module is
configured to use the central thermostat (place a bridge on the channels to be
controlled by the remote handset).
The remote control can therefore be used as a central thermostat to control the
Ubio heating modules.
On the INFO screen, you can adjust the thermostat using the - and + buttons.
Contact your installer.
22
mode beforehand on the home screen.