Installer Information - aldes 11023226 Notice De Montage Et D'utilisation

3. INSTALLER INFORMATION

Press the and buttons for 3+ seconds to access the Expert Menu.
Menu 1:
View system
status
Menu 2:
Adjust bright-
ness
Menu 3:
Activate timer
switch
Menu 4:
Weekly
programming
Réglage du
programmateur
horaire
Remote control firmware version, here V01.02.
An Aldes Ubio heating module is connected.
An Aldes de-icing coil is connected.
Adjust using -
Activate timer: ON
Configure timer: see following menu
Setting programs:
This is done in 3 steps, to be repeated as many times as
necessary:
1) Select menu 4 by pressing OK.
2) Select the number of the day of the week to configure (first
use «all» to set identical time periods for the whole week and
save time).
3) Modify the time period on each day:
In this phase the speed icon (here V2) flashes to indicate the
setting for the time period in question (here 4 pm - 5 pm).
- Adjust the desired fan speed for this time period using the
« - »
- Move to the next time period by pressing « + »
Quick setting tip: press and hold the « - » key and press « + »
several times to copy the same fan speed to several time
periods.
Once you have configured the whole week, repeat these
steps to modify the days that may need different settings
(weekends, etc.).
View and set fan speed (here 3) for each time period of the
day (here 6 pm - 7 pm).
- Select next time period using +
- Adjust desired fan speed for this time period using -
Quick setting tip: press and hold the - key and press + several
times to copy the same fan speed to several time periods.
21
and +