ACDelco ARI20132 Manuel D’informations Sur Le Produit page 10

metallic particles should be kept away from the adapter.
Always unplug the adapter from the power outlet when there is no battery to be
charged.
Unplug the adapter before attempting to clean.
Do not freeze or immerse charger in water or any other liquid.
WARNING
To facilitate the cooling of the battery after use, avoid placing the adapter or battery
in warm environments such as in a metal shed, or non-insulated trailer.
CAUTION
housing on the tool breaks or cracks, return the tool to a certified service center for
recycling.
WARNING
authorized service center is required to avoid damage to static sensitive internal
components. Read all of the instructions in the battery charger section before
attempting to charge the battery.
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery pack release button (C) and pull
the battery pack (A) out of tool.
TO INSTALL BATTERY PACK: Push the battery pack (A) onto tool until it locks in
place.
1English1
Do not allow liquid to enter adapter. Electric shock could result.
Never attempt to open the tool for any reason. If the plastic
Do not attempt to repair this tool yourself. Servicing at an
ASSEMBLY
English -9