EINHELL TE-CR 18 Li DAB+/FM/BT Instructions D'origine page 20

5.11.3 DRC (DAB+)
•
DRC (Dynamic Range Compression) is a
function that certain DAB(+/–) stations use.
•
It balances the sound range by amplifying
quiet sounds and reducing the volume of loud
sounds.
•
Select the "DRC" menu option, then choose
the desired setting:
o DRC off
o DRC low
o DRC high
5.11.4 Prune (DAB+)
•
You can use the Prune function to remove
from the radio DAB(+/–) stations that have a
"?" appearing before the name.
•
When you have selected a station that you
want to remove, choose "Prune" from the
menu options.
•
Here you can choose between "Yes" or "No".
•
Select "Yes" to remove the station.
5.11.5 Preset (DAB+/FM)
•
Preset recall: with this option you can bring up
the list of saved stations (1-30).
•
Preset store: The currently selected station
can be stored in a preset memory position
(1-30) with this option. Use the volume con-
trol (10) to select the desired preset memory
position.
5.11.6 Auto Scanning (FM)
•
With this option, an auto scan of the available
FM stations will be carried out.
5.11.7 Scan settings (FM)
•
All stations: With this option, all the stations
found will be shown, regardless of signal
quality.
•
Strong stations only: In this case, only stations
with a strong signal will be shown.
5.11.8 Audio settings (FM)
•
Stereo allowed: With this option, regardless of
the signal received, the audio output will be in
stereo sound.
•
Forced mono: Here, music will be reproduced
in Mono sound.
EN
5.11.9 System (available in all modes)
5.11.9.1 Set time/date
•
Setting manually
o Use the volume control (10) knob to select
the "Time" menu item.
o Select the "Time/Date" menu item.
o Next, using the volume control (10) to set
the time and date, and confirm everything by
pressing the volume control (10)
•
Setting automatically:
o Use the volume control (10) knob to select
the "Time" menu item.
o Select the "Auto Update" menu item.
o Here you have the possibility to select the
source to be used to automatically set the
time and date.
o Available options:
▪ Update from Any (in this case both DAB and
FM will be used to set the time and date)
▪ Update from DAB (in this case only DAB will
be used to set the time and date)
▪ Update from FM (in this case only FM will be
used to set the time and date)
▪ No update (in this case there is no automatic
reference to time or date)
•
Set 12/ 24 hour:
Under this option you can choose between
the 12h or 24h format
•
Date format:
Here you can adjust the date format.
Available options:
▪ MM-DD-YYYY
▪ DD-MM-YYYY
5.11.9.2 Alarm
•
Use the volume control (10) to select the
"Alarm" menu item.
•
Up to two alarms can be set here:
•
Alarm 1 Info / Alarm 2 Info
o Alarm
▪ Alarm off
▪ Alarm on
o Frequency
▪ Daily
▪ Once
▪ Weekends
▪ Weekdays
o Wake up time
▪ The desired wake-up time is set here
o Source
▪ Buzzer
- 20 -