Systembuild Evolution 3384872COM Mode D'emploi page 16

STEP 11
MPORTANT: THIS UNIT
THESE INSTRUCTIONS
PRODUCT.
OPTION 1: Attachment
into a wall stud
(preferred method)
Using a stud finder,
locate a stud in the wall.
Place your unit against
the wall aligned in this
location.
To make driving the
screw easier, you can
drill a 1/8" diameter pilot
hole (3mm) into the stud.
Drive the screw (10)
through the hole of back
panel into the wall stud.
OPTION 2: Attachment
into drywall
Locate your unit where
desired against a wall
then move your unit
aside.
Drill a 3/16" diameter hole
(5mm) into the wallboard.
Tap the wall anchor (9)
into the hole until it is
flush.
Move your unit into
location and fasten it to
the wall anchor (9) with
the screw (10).
ameriwoodhome.com
9
MUST BE SECURE
TO INSTALL THE ANTI-TIPPING
@ x2
TO THE WALL TO HELP
SAFETY
16
systembuild
EVOLUTION
PREVENT TIPOVER.
BRACKET PROVIDED
Serious or fatal crushing
injuries
can occur
tipover.
To prevent tlpover:
* Install tipover restraint
provided
* place heaviest items in the
lowest
shelves
* Unless specifically designed
to
accomodate,
other
heavy objects on the top of this
product
* Never
or
hang on drawers, door, or
shelves
Use of tipover restarints may
only
reduce,
risk
of tipover
For Masomy, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate
anchors to securely attach the
safety bracket.
noao
FOLLOW
WITH THIS
WARNING
from fumiture
do not set TVs or
allow children to climb
but not eliminate the