Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
Installation screws provided must be secured
with wall plugs (purchase separately).
6
Screw the two screws 12d supplied onto the
brackets 7.1.
Hook the hood body onto the bracket 7.1,
centering it around the vertical line.
Use the adjusting screws 12d underneath the
hood to level the hood body.
I = 6x
12.d
7.1
5
12a
Fix the brackets 7.1 using the 12a screws
supplied in the hood body fixing holes as
shown.
7
Ø
From inside the Hood body, mark the security
hole, drill ø 5/16" where marked, insert 2 wall
plugs 11 in the holes and fix with 2 screws.
x2
8
mm
5/16"
x2
x2
12a
13
Publicité
Table des Matières
