Additional Information - Tunturi C50-R Manuel De L'utilisateur

- Do not run the mains cable underneath the equipment� Do not run
the mains cable underneath a carpet� Do not place any objects on
the mains cable�
- Make sure that the mains cable does not hang over the edge of a
table�
- Make sure that the mains cable cannot be caught accidentally or
tripped over�
- Do not leave the equipment unattended when the mains plug is
inserted into the wall socket�
- Do not pull the mains cable to remove the mains plug from the wall
socket�
- Remove the mains plug from the wall socket when the equipment
is not in use, before assembly or disassembly and before cleaning
and maintenance�
Assembly instructions
Description (fig� A)
Your Crosstrainer is a piece of stationary fitness equipment used to
simulate cycling without causing excessive pressure to the joints�
Package contents (fig� B&C)
- The package contains the parts as shown in
fig� B�
- The package contains the fasteners as shown in fig. C. Refer to the
section "Description"
‼ NOTE
• If a part is missing, contact your dealer�
Assembly (fig� D)
⚠ WARNING
• Assemble the equipment in the given order.
• Carry and move the equipment with at least two persons.
⚠ CAUTION
• Place the equipment on a firm, level surface�
• Place the equipment on a protective base to prevent damage to
the floor surface�
• Allow at least 100 cm of clearance around the equipment.
• Refer to the illustrations for the correct assembly of the
equipment�
‼ NOTE
• Save the tools provided with this product, after you completed
the product assembly,
for future service purposes�
Use
Adjusting the support feet
The equipment is equipped with 4 support feet� If the equipment is
not stable, the support feet can be adjusted�
- Turn the support feet as required to put the equipment in a stable
position�
- Tighten the locknuts to lock the support feet�
‼ NOTE
• The machine is the most stable when all support feet are turned
fully in� Therefore start to level the machine by turning all
support feet fully in, before turning out the required support
feet to stable the machine�
Adjusting the pedal position
The both pedals can be adjusted according to the height and the
exercise position of the user�
- Loosen the 2 pedal fixing knobs�
- Move the pedal to the required position�
- Tighten the pedal fixing knobs�
‼ NOTE
• Make sure the both pedals are fitted into similar positions
always�
Adjusting the console
The console can be adjusted according to the height and the exercise
position of the user�
- Loosen the console adjustment knob�
- Move the console to the required position�
- Tighten the console adjustment knob�
Power supply (Fig� E-1)
The trainer is powered by an external power supply� Refer to the
illustration to locate the trainer's power input�
‼ NOTE
• Connect the power supply with the trainer before connecting it
to the wall outlet�
• Always remove power cord when machine is not in use.

Additional information

Packaging disposal
Government guidelines ask that we reduce the amount of waste
material disposed of in land fill sites� We therefore ask that you
dispose of all packaging waste responsibly at public recycling centres�
End of life disposal
We at Tunturi hope you enjoy many years of enjoyable use from your
fitness trainer� However, a time will come when your fitness trainer will
come to the end of its useful life� Under 'European WEEE Legislation
you are responsible for the appropriate disposal of your fitness trainer
to a recognised public collection facility�
1 9
English