Safety Instructions - Zipper Maschinen ZI-FKS315 Mode D'emploi

2.3 Components
1 Saw table
Saw blade guard
2
Sliding table
3
Saw blade
4
Splitter
5
6 Longitudinal fence
Cross fence
7
Cutting depth adjustment
8
Angle setting
9
ON/OFF switch
11
Clamping screw
12
Extractor hose
13
Dust collector plug
14
15 Wheels
Handles
16
Chip box
17
Legs
18
Table lock
19
Mounting
23
Rubber feet
25
Hook for tool
28
29 Mounting for extractor hose
2.4

SAFETY INSTRUCTIONS

The ZIPPER Table saw ZI-FKS315 shall be used
only for cutting of wood.
ZIPPER MASCHINEN cannot be held responsible
for any injuries or damages if there was per-
formed manipulation or adjustments to the ma-
chine.
Before doing some works of mainte-
nance, you have to disconnect the
machine from the electrical net!
Do not operate the machine at insuffi-
cient lighting conditions.
Do not operate the machine outdoors.
Do not operate the machine when you
are tired, when your concentration is
impaired, and/ or under the influence
of drugs, medication or alcohol.
Always be focused when working, take
care to maintain a safe posture at eve-
ry time.
Always use the fence and the sliding
stick!
Don't work with your machine outdoors
or in a wet area.
Slipping/ stumbling/ falling down are a
frequent cause of severe injuries.
The machine shall be used only by
trained persons.
Non authorized persons,
children, shall be kept away from the
working area.
Do not wear loose clothing, long hair
openly or loose jeweler like necklaces
etc. when operating the machine
They might be catched by rotating
parts and cause serious injuries.
Use proper safety clothing and devices
when operating the machine (safety
goggles, ear protectors, safety shoes
...)! Do not use safety gloves!
especially
16