Safety Instructions; Remaining Risks - Zipper Maschinen ZI-TKS315 Mode D'emploi

Scie circulaire à table
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2.3

SAFETY INSTRUCTIONS

The ZIPPER table saw ZI-TKS315 shall be used only for cutting of wood.
ZIPPER MASCHINEN cannot be held responsible for any injuries or damages if there was per-
formed manipulation or adjustments to the machine.
Do not operate the machine at insufficient lighting conditions.
Do not operate the machine indoors.
Do not operate the machine when you are tired, when your concentration is
impaired, and/ or under the influence of drugs, medication or alcohol.
Always be focused when working, take care to maintain a safe posture at
every time.
Always use the fence and the sliding stick!
Don't use the machine outdoors or in a wet area!
Slipping/ stumbling/ falling down are a frequent cause of severe injuries.
The machine shall be used only by trained persons.
Non authorized persons, especially children, shall be kept away from the
working area.
Use proper safety clothing and devices when operating the machine (safety
gloves, safety goggles, ear protectors, safety shoes ...)!
Before doing some works of maintenance, you have to disconnect the ma-
chine from the electrical net!
2.3.1

Remaining risks

Even if you abide by all the safety regulations you'll have to attend following remaining risks:
• Danger of injury for the hands/fingers from the rotating saw blade during the operation.
• Danger of injury at contact with voltage-carrying parts.
• Danger of injury through break or spinning out of the saw blade or parts of it.
• Hearing damage, when the operator didn't protect his ears.
• Danger of injury through setback or spinning out of the work piece or parts of it.
Do not wear loose clothing, long hair openly or loose jeweler like
necklaces etc. when operating the machine
They might be catched by rotating parts and cause serious injuries.
19

Publicité

Table des Matières
loading

Table des Matières