Advanced Settings; Airzone Cloud; Information; Settings - Airzone Aidoo Pro Azai6Wsphi3 Guide Rapide

Advanced settings

EN

AIRZONE CLOUD

Information

Name. Name of the device.
MAC. MAC address of the device.
Version. Displays the webserver version of the device.
Wi-Fi. Network linked to the device.
IP address. Displays the IP address of the device.
Integration. Integrations available through the webserver. Allows you to make the following
configurations depending on the integration selected:
•
Modbus RS485. Edition of the Modbus ID and selection of communication speed.
•
BACnet MS/TP. Edition of MAC address, BACnet ID, communication speed, max master
nodes and max frames.
•
AirQ. Device for air purification by ionization.
Indoor unit*. Displays the following information for the indoor unit: manufacturer, thermostat
units (configurable in °C or °F), zone temperature and return temperature.
* Not available in Bluetooth configuration.

Settings

Auxiliary heat. It is used to activate or deactivate this function and to set configurations:
•
Delta On (T
Range: -4ºC (-7.2°F) / -1.5ºC (-2.7°F) in steps of 0.5ºC (0.9ºF). Default: -2.5ºC (-4.5ºF).
•
Delta Off (T
Range: -0.5ºC (-0.9°F) / -1.5ºC (0.9°F) in steps of 0.5ºC (0.9ºF). Default: -0.5ºC (-0.9ºF).
•
Delay time. It configures the delay time for the activation of Auxiliary Heat using
selectable values. Deactivated: 90-second delay.
•
Type of ventilation. It is used to choose between ducted heating or external auxiliary
heat.
Auxiliary Heat ON
- 4 ºC
T
zone
- 4 ºC
T : Zone ambient temperature
zone
8
To perform advanced
configuration of the device,
download the Airzone Cloud
app.
). Offset applied to the setpoint temperature to activate auxiliary heat.
on
). Offset applied to the setpoint temperature to switch off auxiliary heat.
off
- 1,5 ºC
T
on
To access the advanced
configuration, follow the
steps
installation manual.
T
off
Set-Point
- 0,5 ºC 0,5 ºC
Auxiliary Heat OFF
described in the
1 ºC