Preparing The Hard Disk For Use With Windows 7; Backup Function - Ewent EW7016 Mode D'emploi

Click 'Next'.
8.
Click 'Next'.
9.
10. Click 'Next'.
11. Choose the desired partition format (Note: when using FAT32 the partition size is
limited to 32GB).
12. Click 'Next'.
13. Select the drive letter you wish to assign to this partition (this is not required).
14. Click 'Next'.
15. Select the desired file system: FAT32 or NTFS.
Note! If you only use the hard disk on Windows XP or Vista systems we recommend
you to select the NTFS file system.
16. Enter a name for the new partition in the field 'Volume label'
17. Enable the checkbox at 'Quick format'.
18. Click 'Next'.
19. Click 'Finish'.
20. The hard disk is now ready to be used.

5.2 Preparing the hard disk for use with Windows 7

Click 'Start'.
1.
Click 'Control Panel'.
2.
Click 'System and security'.
3.
Click 'Manage'.
4.
Click 'Disk Management'.
5.
Right-click 'New volume'.
6.
Click 'Next'.
7.
The wizard 'New Volume' appears,
8.
Click 'Next'.
9.
10. Choose the desired partition format.
11. Click 'Next'.
12. Select a drive letter at 'Assign a drive letter'.
13. Click 'Next'.
14. Choose the desired file system.
15. Click 'Next'.
16. Click 'Finish'.
17. The notification 'New Volume found' may appear'.
18. The hard disk is now ready to be used.

6.0 Backup function

The EW7016 is equipped with a backup button. When using this button, you are able
to make a backup of the data. In order to use this function you have to install the
supplied PC Clone Lite software.
15 |
ENGLISH