Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
14 |
ENGLISH
4.2 Connecting a SATA hard disk or SATA CD-ROM/DVD
player
1.
Connect the power cable to the power converter.
2.
Connect the SATA power cable to the power converter.
3.
Connect the other end of the SATA power cable to the corresponding SATA
connector of the hard disk or CD-ROM/DVD player.
4.
Connect the SATA cable to the corresponding SATA connector of the SATA hard
disk or CD-ROM/DVD player.
5.
Connect the other side of the SATA cable to the SATA connection of the
EW7016.
6.
Connect the USB 3.0 cable to a free USB (3.0) port of the computer.
7.
Connect the small plug of the USB (3.0) cable to the USB connection of the
EW7016.
8.
Connect the power supply to a wall outlet.
The 'Wizard New Hardware' may appear. Should you see the following message:
9.
'Is Windows Allowed to make a connection to Windows Update to search for
software?', select 'No, not now'.
10. Click 'Next'.
11. Select 'Install the software automatically (recommended)'.
12. Click 'Next' and follow the steps shown on screen.
4.3 Safely remove a USB device
Follow the instructions below to safely disconnect a device from the EW7016.
Double-click the 'Safely remove hardware' icon in the taskbar, near the clock.
1.
Select the EW7016 (USB device for mass storage) and click 'Stop'.
2.
Click 'OK' to confirm.
3.
4.
Disconnect the hard disk, CD-ROM player or DVD-player from the EW7016.
5.0 Preparing a hard disk for usage
When using a hard disk for the first time, you need to initialize the hard disk in order to
make the hard disk 'visible'. Use the following steps to initialize the hard disk.
5.1 Preparing the hard disk for use with Windows
2000/XP/Vista
Right click the 'My Computer' icon.
1.
Click 'Manage'.
2.
Select the option 'Disk Management' from the left side of the screen.
3.
Right click the new hard disk and choose 'Initialize'.
4.
Click 'Ok'.
5.
6.
Right click the new hard disk.
Click 'New Partition'.
7.
Publicité
Chapitres
Table des Matières
