BeeWi BC7PW Guide D'utilisation page 6

6
The screws provided in the pack are not convenient for all walls, please check a
specialist before drilling your wall.
Mark the position of the screw holes, then drill the hole. The camera should be strongly
held. Don't forget that the camera needs a power supply. If the camera is fixed upside
down, you can switch the video stream in our app (see 2.4)
If an antenna is supplied, don't forget to connect it. (Only for some models)
Connect the AC adapter and plug it to a wall plug
For some models, you need to connect the RJ45 network cable from camera to router.
Then launch the app and add camera. After scanning QR code, the app will detect
your camera. If you want to use it in Wi-Fi mode then you should set your Wi-Fi settings
in the Advanced Settings >Wi-Fi Settings and enter the password of your Wi-Fi network
(your smartphone needs to be connected to the same network)
2.3 Connecting your camera to Wi-Fi using CamPad
Important: Verify your smart device (iOS or Android) is connected to a 2.4 GHz Wi-Fi.
Launch BeeWi
CamPad app,
plug camera
and click on
"add Camera"
Scan the QR
code on the
back of the
camera, and
name the
camera. Then
tap on "Next"
ENGLISH