Philips 3H APOLLO HQ6870/33 Mode D'emploi page 8

ENGLISH
10
C
C
2
1
Only remove the batteries if they are completely
empty.
1 Remove the powerplug from the socket
and pull the appliance plug out of the
shaver.
2 Let the shaver run until it stops, undo the
screws and open the shaver.
3 Remove the batteries.
Do not connect the shaver to the mains again
after the batteries have been removed.
Troubleshooting
1 Reduced shaving performance
Cause 1: the shaving heads are dirty.
B
The shaver has not been rinsed long enough or
B
the water used was not hot enough.
Clean the shaver thoroughly before you
continue shaving (see 'Cleaning').
Cause 2: long hairs are obstructing the shaving
B
heads.
Remove the retaining frame.
Remove the hairs with the brush supplied.