Riwall PRO RI41140-40WN Mode D'emploi page 7

provided with a shut-off valve, turn the fuel off at the conclusion of working;
o) Keep the machine free of oil, dirt and other impurities.
p) Please always place the appliance on even and stable surfaces.
q) Never operate the appliance inside buildings or in an environment without
proper ventilation. Pay attention to air flow and temperature.
r) Do not operate or store the appliance in wet or humid surroundings.
s) Ensure the sound absorber and air filter work properly. These parts serve as
flame protection in case of misfire.
t) To avoid possible burn injuries, do not touch the exhaust system or other
parts that become hot during operation. Pay attention to the warnings on the
machine.
u) The engine must not be operated with excessive rotary speed. The operation
of the engine with excessive rotary speed raises the risk of injury. Parts which
affect the rotary speed must not be altered or replaced.
v) Regularly check for leakage or traces of abrasion in the fuel system, such as
porous pipes, loose or missing clamps and damage to the tank or tank cap.
Before use all defects must be repaired.
Maintenance and storage
a) Keep all nuts, bolts and screws tight to ensure the equipment is in safe
working condition.
b) Never store the equipment with petrol in the tank inside a building where
fumes can reach an open flame or spark.
c) Allow the engine to cool before storing in any enclosure.
d) To reduce the fire hazard, keep the engine, silencer and petrol storage area
free of vegetative material and excessive grease.
e) Replace worn or damaged parts for safety.
f) If the fuel tank has to be drained, this should be done outdoors.
g) Always clean and maintenance before storage.
h) Never disassembly the guards for cutting attachments.
i) Always store the metal blade in cool and dry place, never use rusted blade. It
may cause serous injure during working.
SPECIAL SAFETY WARNINGS FOR TILLER
1) Before using the appliance, always check visually that the tools are not worn
or damaged. Replace teeth and bolts, worn or damaged lots to preserve the
balance.
GB
5