DeLOCK 70146 Manuel D'utilisation page 3

Hardware Installation
Note:
Follow the general instructions for installation of the controller card. If necessary,
read the manual of your computer, or ask a specialist for help.
1. Turn off your PC, and unplug the power cord.
2. Open the housing.
. Remove the slot holder from the available PCI slot.
4. Insert the card straight and carefully into the free PCI slot, until it is well
seated.
5. Use a screw to attach the card to the housing.
6. Reattach the housing, and connect the power cord to the AC adapter.
Driver Installation
Windows XP/Server-200
During the driver installation Windows may ask for the driver signature. In order
to install the driver operatevely you have to answer the check up with "Continue
installation" or "Yes".
1. After installation of the device, and after start of Windows the Hardware
wizard appears.
2. Put the driver CD in the CD ROM drive and click on "Next".
. Choose the option "No, not this time" and click "Next".
4. Choose "Install software automatically" and click "Next".
5. After the driver is located, click on "Next". Click on "Finish".
6. Restart your PC.
7. You can now start to use the device.
Windows 2000
1. After installation of the device, and after start of Windows the Hardware
wizard appears.
2. Insert the driver CD into the drive and click on "Next".
. Please choose "Search for a suitable device driver" and click on "Next".
4. Select the option "CD drive" and click on "Next".
5. After the driver is found, click on "Next". Click on "Yes".
6. Click on "Finish".
7. Restart your PC.
8. You can now start to use the device.
- -