Troubleshooting; Repair; Lamp Replacement - BKI Sandwich Merchandiser SM-2624 Mode D'emploi

Sandwich Merchandiser

Troubleshooting

Problem
Unit will not turn on.
Product is not holding its
temperature
Unit is not heating

Repair

Before replacing any parts, make sure the power has been turned off and the unit has
cooled down.

Lamp Replacement

Only use PTFE-coated lamp to prevent glass contamination.
1. Remove power from the unit by following the shutdown procedures in the Operation section.
2. Allow the equipment to cool to room temperature.
3. Remove lamp guard.
4. Carefully remove the faulty lamp.
5. Replace with the new lamp and reattach the lamp guard.
Cause
Power cords not
connected or circuit
breaker supplying power
to the unit has tripped.
Product temperature is
too low when loaded.
Or
Faulty component in
heating circuit
No power to unit
Or
Faulty component in top
or bottom heating circuit.
10
Possible Solution
Make sure power cords are connected and circuit
breaker is on. If problem persists, contact a
licensed electrician.
Make sure product is above 160° F when loaded.
Contact an authorized BKI service agent for
corrective action.
Make sure power cords are connected and circuit
breaker is on. If problem persists, contact licensed
electrician.
Contact an authorized BKI service agent for
corrective action.
Maintenance