Koba Vision ZoomCam Mode D'emploi page 13

Selecting the camera
On the Tools toolbar tab, click the arrow next to Camera or navigate to Camera and press the down arrow
key. In the Camera menu, choose Settings.
•
In the Active Camera list box, choose ZoomCam USB stream.
•
Disable automatically set camera resolution.
•
Resolution: 1920 x 1080
•
Frame Rate: 60 FPS
•
Click OK.
•
TIP: Save your settings under ZoomText – Configurations – Save as default. This will save your settings
so you don't have to redo all the settings next time.
Adjusting the viewer position and size
In the Camera toolbar you can choose:
•
Full screen: the whole screen shows the image of the ZoomCam. To switch between Full and Docked view,
press CAPS LOCK + CTRL + C to activate layered keys mode, then press Tab to switch between Docked /
Full View.
•
Docked view (split screen): the image of the ZoomCam is displayed on 50% of the screen. You choose where
you want the image to be displayed. You can choose from: top, right, bottom, left. Hotkey: CAPS LOCK +
LEFT / RIGHT ARROW
Magnification
Use the buttons on the ZoomCam remote control to do this. The buttons in the ZoomText Camera Toolbar
also work, but they zoom in and out in large steps.
KOBA Vision ZoomCam 13