Details And Illustrations Of Components And Accessories; User Advice - Henry Schein 900-3892 Manuel D'utilisation

2
WARNING NOTICES
DANGER: indicates the risk of causing death or serious injury if the product is operated
incorrectly without due care and attention.
WARNING: indicates the risk of causing malfunction or damage to the Henry Schein
Alginate Mixer if the product is operated incorrectly without due care and attention.
CAUTION: indicates the risk of causing a potential slight injury to the user and other
persons, or damage to the product without due care and attention.
IMPORTANT: indicates risk of malfunction of machine, imperfect results, poor mixture
or other effects.
DETAILS AND ILLUSTRATIONS components and accessories :
1. Main switch
2. Power on/off button
3. Memory selection
4. Start/Stop button
5. Mixing Time display
6. Increase /Decrease
7. Memory address indicator
8. Power cord
9. Voltage adaptor (100/200~240 Vac.)
10. Fuse holder
11. Mixing bowl
12. Machine casing
13. Spatula
14. Mixing stick
15. Water-dosing bottle
16. Basket for miscellaneous articles
17. Retention bolts (immobilisation bolts) in base of unit.

USER ADVICE :

Please adhere fully to the following operational guidelines to ensure smooth, malfunc-
tion free operation.
1. Use cold water (10C° ~ 20C°) to extend the setting time. If using a fast-set alginate
monitor the setting time carefully.
2. Before operating ensure that the Mixing bowl lid has been fully closed, to avoid any
spillage or malfunction.
3. Capacity of alginate impression material for mixing is between 25g and 100g, never
exceed 100g.
4. Only operate with a closed mixing cup to prevent the possible spillage while run-
ning.
5. Ensure small hole in the centre of Mixing bowl lid is free of debris or residue or this
will impair closing.
Timer set