Callaway GPSYNC WATCH Mode D'emploi page 3

CHARGING
Power watch Off. Hold [
1.
screen goes blank.
2. Connect Charger Pins on the charger to
the Charging Ports on the watch.
Note: Charger Pins and Charging Ports
must be aligned properly (Easiest to align
while looking at back of watch).
3. Secure Charger Clamp on the charger to
Charger Socket located on opposite side
of watch.
4. Plug USB cord end into USB port.
5. When connection is
made, watch will
power on and Battery
Icon bars will pulsate
to indicate charging.
Note: Battery Icon bars will stop pulsating
when charging is complete. (2-3 hours)
CHARGING PINS
CHARGER CLAMP
https://manual-hub.com/
POWER
(See watch diagram page 4)
CHARGING PORTS
CHARGER SOCKET
] until
ENGLISH 3