Emc Information - VenenWalker basic HNS018839 Mode D'emploi

IT

EMC Information

The appliance is complied with the following emission and immunity standard, and test
level:
Emissions Test Standard
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/ flicker emissions
IEC 61000-3-3
Immunity Test standard IEC 60601-1-2 Test Level
Electrostatic discharge
(ESD)
IEC 61000-4-2
Electrical fast transient/
burst
IEC 61000-4-4
Surge IEC 61000-4-5
Voltage dips, interruptions
and variations on power
supply input lines
IEC 61000-4-11
Power frequency
(50 / 60 Hz) magnetic field
IEC 61000-4-8
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
Note: UT is the AC mains voltage prior to application of the test level.
06019_de-en-fr-nl-it_A5_V2.indb 86 06019_de-en-fr-nl-it_A5_V2.indb 86
86
Compliance
Group 1
Class B
Class A
Comply
± 8 kV contact
± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV
air
± 2 kV, for power supply
lines
± 1 kV signal input / output
100 kHz repetition
frequency
± 0.5 kV, ± 1 kV differential
lines
± 0.5 kV, ± 1 kV , ± 2 kV
common mode
0 % UT; 0.5 cycle. At 0°,
45°, 90°, 135°, 180°, 225°,
270° and 315°.
0 % UT; 1 cycle and 70 %
UT; 25 / 30 cycles; Single
phase: at 0°.
0 % UT; 250 / 300 cycle
30 A/m
50Hz / 60Hz
3 V
0.15 MHz – 80 MHz
6 V in ISM and amateur
radio bands between
0.15 MHz and 80 MHz
80 % AM at 1 kHz
10 V/m
80 MHz – 2.7 GHz
80 % AM at 1 kHz
Compliance Level
± 8 kV contact
± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV
air
± 2 kV, for power supply
lines
± 1 kV signal input / output
100 kHz repetition
frequency
± 0.5 kV, ± 1 kV differential
lines
± 0.5 kV, ± 1 kV , ± 2 kV
common mode
0 % UT; 0.5 cycle. At 0°,
45°, 90°, 135°, 180°, 225°,
270° and 315°.
0 % UT; 1 cycle and 70 %
UT; 25 / 30 cycles; Single
phase: at 0°.
0 % UT; 250 / 300 cycle
30 A/m
50Hz / 60Hz
3 V
0.15 MHz – 80 MHz
6 V in ISM and amateur
radio bands between
0.15 MHz and 80 MHz
80 % AM at 1 kHz
10 V/m
80 MHz – 2.7 GHz
80 % AM at 1 kHz
15.04.2021 15:22:24 15.04.2021 15:22:24