Maintenance And Inspection - Varan NEJKS-02 Manuel D'utilisation

MAINTENANCE AND INSPECTION

Visual inspection shall be made before each use of the stands by
checking abnormal condition, such as cracked welds, leaks and damaged,
loose, or missing parts. If stand is believed to have subjected to
abnormal load or shock inspect, it shall be repaired by authorized repair
facility.
Equipment that appears damage or worn or operates abnormally shall
be removed from service until repair. Repair should be made by an
authorized repair facility. Annual inspection of the stand is
recommended and should be made by the manufacturers' or supplier's
authorized repair facility to ensure that you stand is optimum conditions
and that the stand has correct decals and safety labels specified by the
manufacturer.
DISPOSING OF THE TOOL
If your tool has become damaged beyond repair, do not throw it out.
Bring it to the appropriate recycling facility.
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
T: 00352/26908036 – F: 00352/26908040
NEJKS-02
NEJKS-03