Parts
Identification
(see fig I)
(A) Protective cap
(B)Outer roti
(C)Outer blade trame
(D)fnner blade
(E) inner blade mount
(F)OrVofi switch
(G)Body
(H) Battery cover
( I )Cieamng brush
Before
use
This persona'
grooming
designed
to trun the nose and ear
hars
Do not attempt to use It for any
other purpose
Replacing
battery
(see fig 2)
Press the battery
downward
to remove
AA battery
To replace the battery cover, reverse
the above procedure
Using your trimmer
(see fig 3)
Tum the switch on and caretuny Insert
the tip of the outer blade Into your
nostril
or earhole
ear hars
device
cover and slide
It and
Insert
one
to tnm
the
nose
and
Maintenance
(see fig 4)
Be sure
that
before removtng. replac•ng or cleanng
the blades
To remove the outer blade frame, tum
It and match the "ne (a) With (b) and
pull upward
Detach the Inner blade from the outer
blade Wipe the blades With a ttssue to
remove any cut hairs, dust, etc
Next, put the Inner blade back Into the
outer
blade
IS
To replace the outer blade trame to the
body match the mark (a) and (b), and
turn clockwlse
Caution
Do not Insert the device
your nostril
narrow tip on the outer blade
Also,
do
forcefully
earhole
Do not altempt to use the device If the
outer
blade
deformed or damaged, as Injury to your
nostnl or an earhole may occur
This trimmer
cutting
nose
attempt to use It for any other purpose
The blades
manufactured
Do not subject them to excess•ve force,
Impact. etc
Be sure
that
before attemptlng to clean the blades
If used once a week for approx
I mm, at a time,
approx
4 years
5
the
switch
IS turned
until
't cllcks
•n
further
or an earhole than the
not
press
the
Into your
nostril,
frame
or
blades
IS designed
or ear
hairs
have
been
prectslon
the
swltch
IS turned
the life of the blades
Off
Into
tnmmer
or an
are
only for
Do
not
off
IS