Multibrackets M Motorized Tablestand Mode D'emploi page 4

4 sec
Plug in the power supply.
Press and hold the button
Assign LEFT rotation button. LED light will blink 4 times
and will continue to be lit.
Assign CENTER position button. LED light will blink 4
times and will switch off when the programming
for 4 seconds.
LED
LED
is done.
www.multibrackets.com
Lit front LED lamp indicates when ready to start
programming the left, right and stop functions.
Assign RIGHT rotation button. LED light will blink 4
times and will continue to be lit.
LED —
LED