VOGO VOKKERO GUARDIAN EUROPE PLUS Mode D'emploi page 63

VOKKERO GUARDIAN EUROPE Standard | Plus | Atex | User Guide V4.0
6.1 - Updating terminals
To update terminals you have to use a USB key.
Contact your vendor to obtain the most recent software version.
The USB key used must be < or = 4Go.
On the USB key:
- Copy the update software to the root
- The files mustn't be in a folder
- No others files or folder have to be on the USB key
To know the version currently installed in the terminal:
Menu > System > Software > Device update:
The version currently installed in the terminal appear on the display. (Screen No. 1).
To configure a new software version on the terminals:
• Once the USB key ready, insere it into the dedicated USB port, situated on the left located on the left side of the configurator.
(Screen No. 2)
• Once the USB key connected, the available software version is displayed. (Screen No. 3)
(If the USB key is empty or involves wrongs files, you will read on the display: «Update file missing from the USB key»)
• Click «GO» to validate. (Screen No. 3)
• Then, click to launch the installation. (Screen No. 4)
1
• The update of the terminals is launched (Screen No. 5).
• The update is finished (Screen No. 6).
Note: All terminals on the Configurator will be updated regardless
of their location on the Configurator.
2 3
5
EN
4
6
63 / 128