VOGO VOKKERO GUARDIAN EUROPE PLUS Mode D'emploi page 60

VOKKERO GUARDIAN EUROPE Standard | Plus | Atex | User Guide V4.0
In this screen you can see all the settings related to the system configuration. The set-
tings in this menu apply to all the terminals present on the configurator.
The available settings are:
• Channel Tables: Allows you to select the product's operating channel table
• Group Mode: Enables or disables group mode
• Encryption: allows you to choose the encryption operating-mode
• Multi-master: allows you to maintain communication with the terminals out of reach
of the Master M1
• Language: allows you to select the display language of the configurator
EN
• Software: allows you to update the software version of the terminals and configurator
The settings are displayed over several pages. To browse the pages, select the left and
right arrows at the bottom of the screen.
1 - Channel tables
Use this setting to select a predefined table of channels so as to be able to use the terminal in European Union. By default, the
terminals are configured without any channel restrictions (i.e., ALL selected); this means that all the channels can be used while
making sure to correctly respect the use case of each country in which the product is used.
A full list of restrictions for each country is given in page 9 of this user guide.
All zones are described below:
ALL (with restrictions)
A license may be required for the use of certain channels in certain countries, check with local authorities.
Available channels : Eu1 - Eu2 - Eu3 - Eu4 - Eu5 - Eu6 - Eu7 - Eu8 - Eu9 - Eu10
Countries : Germany, Belgium, Spain, Netherlands, Portugal, Czech Republic, Switzerland, Liechtenstein, Denmark,
Estonia, Finland, Ireland, Luxembourg, United Kingdom, Slovenia, Norway, Iceland, Bulgaria, Cyprus, Croatia, Greece, Hungary, Italy,
Latvia, Malta, Romania, Slovakia.
60 / 128