Extreme Max 5001.5013 Instructions De Montage
Les langues disponibles
Les langues disponibles
Liens rapides
-naäuC7$
Warning:
Crush
Hazard.
• The lynch pin in the handle linkage prevents
lynch pin when snowmobile
• Do not allow children
to play on or near a lifted snowmobile.
• Ensure that snowmobile
• Know and follow
all manufacturer's
Parts:
(1) Base Foot Bracket
(1) Center
Post
(1) Handle
(2) Hook
Brackets
(1) Hook
(2) Linchpin
Product
Satisfaction
At Extreme Max, we pride ourselves
not 100% satisfied with the product, for any reason, please reach out to us. We are here to help!
Warranty
This product
is warranted
for consumer
Warranty
valid only in the USA.
This product
is warranted
to the original
wear and tear expected.
This warranty
of goods or any acts of vandalism
commercial
use. The sole remedy under this warranty
or similar product,
or the refund of the original
incidental
damages.
Any and all freight charges to handle warranty
MaxTM is not responsible
for any labor charges that may be incurred.
For all inquries please send your name, mailing address, main contact phone number,
summary
of alleged defect and any applicable
Step 1) Place the center post onto the base foot bracket, aligning the holes.
Fasten in place with two 1.75" bolts and lock nuts.
Customer Service: service@extrememax.com
Assembly
the snowmobile
is lifted. Remove the lynch pin to operate the lift.
is securely
positioned
on lift at all times.
safety instructions
(2) Bolt-
1.75"
(1) Bolt-
2.75"
(2) Plastic
Washers
(4) Lock Nuts
Guarantee
on making quality products
use for 2 years after the date of retail purchase. Warranty
retail purchaser
shall not apply to any defects caused by: (l) overloading,
by any person, (Ill) improper
is at the discretion
purchase price. Extreme MaxTM is not responsible
pictures to service@extrememax.com.
Lever
Lift
Stand
Instructions
lift from accidentally
specific to lifting your snowmobile
and wish to correct any mistakes on our end. If you are
to be free from defects in material and workmanship,
installation
or use contrary to the instructions,
of manufacturer:
claims are the responsibility
I www.extrememax.com
5001.5013
5001.5037
lowering.
Always
includes
parts only.
ordinary
(II) physical abuse
(IV)
the replacement
of the same
for any consequential
of the consumer.
original
retail sales receipt,
Figure 1
install
or
Extreme
3518ex0121
Manuels Connexes pour Extreme Max 5001.5013
Sommaire des Matières pour Extreme Max 5001.5013
- Page 1 Product Satisfaction Guarantee At Extreme Max, we pride ourselves on making quality products and wish to correct any mistakes on our end. If you are not 100% satisfied with the product, for any reason, please reach out to us. We are here to help!
- Page 2 Step 2) Insert the handle post into the center post and align a set of holes at a Figure 2 desired height. (This height may be easily adjusted later.) The handle should be positioned over the shorter side of the base foot bracket. Using a linchpin, pin the handle to the center post through the aligned...
- Page 3 (4) Écrousde verrouillage (2) Linchpin Garantie De Satisfaction Du Produit Chez Extreme Max, nous sommes fiers de fabriquer des produits de qualité et souhaitons corriger toute erreur de notre part. Si vous n'étes pas satisfait å 100% du produit, pour quelque raison que ce soit, veuillez nous contacter.
- Page 4 Étape2) Insérezla tige de poignée dans le montant central et alignez un Figure 2 ensemble de trous å la hauteur désirée. (Cette hauteur peut étre facilement ajustée plus tard.) La poignée doit étre positionnée sur le cöté le plus court du support de pied de base.