Extreme Max 5001.5016 Instructions De Montage Et D'utilisation

JLVJ
Safety & Use
Storage stand is designed
performing snowmobile
exerted on the snowmobile.
1) Do not allow children
2) Do not sit, lean, or add weight to a lifted snowmobile.
3) Be certain that snowmobile
4) Use common sense caution.
snowmobile while fatigued,
functioning.
5) Do not adjust the height of the stand while a snowmobile
6) Prior to use, inspect stand for broken or damaged
Figure 1
Parts:
1) 1 - Storage Bracket
2) 1 - Center Post
3) 2- Base Foot Brackets
4) 3 - Lynch Pins
Step 1)
Slide base foot brackets
the feet of the center post. See
Figure 1 for placement.
Customer Service: service@extrememax.com
Assembly
for storage applications
maintenance, or in any situation
to play on, near or around
is securely balanced
Respect any physical
or under the influence
Figure 2
step 2)
Attach the base
using lynch pins. See Figure 2 for
placement.
Step 3)
Insert storage bracket into center
post. See Figure 2 for proper
bracket position.
over
Step 4)
Slip the bolts through
leg holes and tighten
the screw. See Figure 2.
Storage
& Use Instructions
only. Do not use while
where force will be
a lifted snowmobile.
on the lift.
limitations or restrictions
of alcohol, substances
is on it.
parts. Do not use stand if any part is broken or damaged.
foot brackets
the storage
the bolt with
I www.extrememax.com
Stand
5001.5016
and never lift or lower a
or medication that impairs
Completed Assembly
Stand height can be adjusted
by removing lynch pin and
lifting storage bracket. Always
fasten lynch pin securely
through center post and
storage bracket after height
adjustments.
3399ex0120