Extreme Max 3005.4128 Instructions D'installation

-naäuC7$
Includes:
(1) Battery Hanger
(2) J-Hooks
(l) Spacer Bracket
(6) Bolt
(6) Nut
Product Satisfaction
At Extreme Max, we pride ourselves on making quality products and wish to correct any mistakes on our end. If you are
not 100% satisfied With the product, for any reason, please reach out to us. We are here to help!
Warranty
This product is warranted for consumer
Warranty valid only in the USA.
This product is warranted to the original
wear and tear expected. This warranty
ofgood s oranyacts ofvandalism
commercial use. The sole remedy
or similar product, or the refund
or incidental damages. Any and all freight charges to handle warranty claims are the responsibility of the consumer.
Extreme MaxTM is not responsible
For all inquries please send your name, mailing
summary of alleged defect
Instructions
1. Align the holes in the J-hook with the holes on the backside of the battery tray as shown.
through each aligned
tray with the threads extending
2. Place the spacer bracket into position
with a bolt and a nut at both holes. Place a bolt through
the bolts so the bolt head is over the battery tray with the threads
Installation:
1. Locate the boatlift upright
the powered winch.
2. Position the battery tray underneath
the canopy at this upright,
the J-hooks over the top of the
canopy frame. The spacer bracket
should rest against the upright.
3. Ensure that the battery tray does
not interfere with the
boatlift or any of its moving
4. Place the batteries into the battery
tray and secure them in place with a
battery strap.
Customer Service: service@extrememax.com
Under-Canopy
Guarantee
use for 1 year after the date of retail purchase. Warranty
retail purchaser to be free from defects in material
shall not ap ly to any defects caused by: (I) overloading,
byany person, (PII) improper installation
under this warranty
of the original purchase
for any labor charges that may be Incurred.
address, main contact phone number,
and any applicable pictures
hole and secure it with a nut. Position
out the back of the battery tray.
at the back of the battery tray. Align the holes and secure in place
containing
placing
motion of the
pieces.
Dual Hanging
Installation Instructions
oruse contrary totheinstructions,
is at the discretion of manufacturer:
price. Extreme MaxTM is not responsible
to service@extrememax.com.
the bolts so the bolt head is over the battery
each aligned hole and secure it with a nut. Position
extending
I www.extrememax.com
Battery Tray
3005.4128
includes parts only.
and workmanship, ordinary
(II) physical abuse
(IV)
the replacement of the same
for any consequential
original retail sales receipt,
Place a bolt
out the back of the battery tray
9
3399ex0120