Power Supply - Oehlbach FM TOWER 17 Mode D'emploi

FM connection
Your FM Tower 17 is supplied with power via a coaxial connection that has a standard
75 ohm impedance level, which means it can be connected to all common radio devices.
AM connection
The FM Tower 17 is connected to the AM input on your radio or receiver via a two-wire
connecting cable. If the connector features spring-loaded terminals, you can connect the
two wires directly. If you have screw connections, you can wrap the wires around the
screws and then tighten them in place.

Power supply

Insert the jack of the mains adapter into the designated socket on the antenna. You can
then connect the mains adapter to a power outlet.
Please note: When the mains adapter is plugged in, the antenna is supplied with electri-
city. As the mains adapter has very little output, however, this is negligible. To discon-
nect the mains voltage please use a switchable power outlet.
Positioning
1. All types of antenna are affected by electromagnetic fields. In order to achieve the best
possible reception you should position the antenna at a sufficient distance to receivers,
tuners, CD/DVD players, TVs and computers.
Please note: Antennas work best when CD players, VCRs and computers are
switched off.
Installation I ENG