Eneo VMC-17LCD-HMPG1 Mode D'emploi page 17

3. Operating Instruction
FRONT controls
1. Power On/Off & LED
This button then turns the monitor ON and OFF.
LED – A green indicator lights when the power is ON and input signal.
A red indicator lights when the power is OFF. (the indicator blinks when the power is ON and Input NO
signal)
2. Menu / Exit
T his button is used to bring up or disappear the controls menu. Exits from the OSD system and the selected
function.
3. (Down) / (Brightness)
M oves down the menu lists in the OSD. Selected brightness.
4. (UP) / Vol.
Moves up the menu lists in the OSD. Selected volume.
5. (LEFT) / Source
S elected MENU decreases the value. While in the normal active (Not MENU DISPLAY) mode, this button is used to
bring up Sources select Menu (CVBS, CVBS, S-VIDEO, RGB, DVR, HDMI)
6. (Select) / (Freeze) / AUTO
T his button to choose on the menu then pushes the button & Selected MENU increases the value: While in the
CVBS, S-Video mode, press this button to FREEZE (
image. While in the RGB mode, press this button to AUTO adjust the H/V POS, H/V SIZE, and phase.
7. Sensor Window
Remote Control. Receives signal from the Remote controller
) the picture for display. Press again to exit the FREEZE
7