flowWALL FWC-CAB4.2 Instructions De Montage
Manuels Connexes pour flowWALL FWC-CAB4.2
Sommaire des Matières pour flowWALL FWC-CAB4.2
- Page 1 Assembly Instructions FLOWWALL@ JUMBO CABINET BODY Model: FWC-CAB4.2 FLOW WALL' 1891 W 2100 S 1891 2100 Salt Lake City, UT 84119 Salt Lake City, UT 84119 (877)-203-5974 (877)-203-5974 customerservice@flowwall.com customerservice@flowwall.com...
-
Page 2: Parts List
PARTSLIST TALL CABINET BODY FWC-CAB4.2 PICTURE PARTDESCRIPTION QTY. Cam Post Dowel Steel Spanner Spanner Screw SpannerBracket Top/ Bottom Side Panel... - Page 3 FLOW WALLO JUMBO CABINET BODY FWC-CAB4.2 Mount Posts - Screwcam posts (A) into receiverholeson top & bottom panels(F).
- Page 4 FLOWWALL@ JUMBO CABINET BODY FWC-CAB4.2 Side Panel - Glue and insert dowels(B) into side panels(G).(Glue optional) Wood Glue Optional...
- Page 5 FLOW WALC JUMBO CABINET BODY FWC-CAB4.2 Connect Panels-Connectthe top and bottom panels(F) to the sidepanels(G).Insertcams Step 3. (A) into the holeson the sides. S lidethe top and bottom together.Tighten the cams.
- Page 6 FLOWWALL@ JUMBO CABINET BODY FWC-CAB4.2 Add Steel Spanners- Assemblethe steel spanners(C) to your cabinet using the spanner Step 4. screws(D).
- Page 7 FLOWWALL@ JUMBO CABINET BODY FWC-CAB4.2 Hang the Cabinet - Assemblethe spannerbrackets(E) to your Flow Wall panel Step 5. whereveryou would liketo hang your cabinet. Hang the cabinet on the spannerbrackets (E). After hanging,the cabinet can be adjustedside to side by sliding shelland brackets.
-
Page 8: Instruction D' Assemblage
Instruction D' Assemblage FLOWWALL@ STRUCTURE DIJ CABINET JUMBO Modéle: FWC-CAB4.2 FLOW WALL' 1891 W 2100 S 1891 Salt Lake City, UT 84119 Salt Lake City, UT 84119 (877)-203-5974 (877)-203-5974 customerservice@flowwall.com customerservice@flowwall.com... -
Page 9: Référence Discription
LISTEDES STRUCTURE DU CABINET GRAND FWC-CAB4.2 RÉFÉRENCE DISCRIPTION QTE. IMAGE Came et Poteau Cheville Clé en acier Clé ä vis Support de serrage Dessus/Dessousdu cabinet Panneau latéral... - Page 10 FLOW WALLO STRUCTURE DU CABINET JUMBO FWC-CAB4.2 Poteaux de montage - Vissez le poteau (A) dans lesorificesdu receveursur le Etape 1. panneaudu dessuset du dessous(F).
- Page 11 FLOWWALL@ STRUCTURE DU CABINET JUMBO FWC-CAB4.2 Panneaulatéral - Collezet insérezleschevilles (B) dansle panneaulatéral(G). Etape 2. (colle ä boisoptionnelle) COLLE BOIS OPTIONNELLE...
- Page 12 FLOW WALC STRUCTURE DU CABINET JUMBO FWC-CAB4.2 Connecter les Panneaux- Connectezlespanneaux du dessus et du dessous (F) aux Etape 3. panneauxlatéraux(G).Insérez lescames(A) danslesorificeslatéraux.Faitesglisserla piEce du dessuset celle du dessous. Serrez les cames.
- Page 13 FLOWWALL@ STRUCTURE DU CABINET JUMBO FWC-CAB4.2 Support ä étagære- Assemblezles supportsä étagäre(C) å votre cabinet en utilisant Etape 4. lesvis étagäre(D).
- Page 14 FLOWWALL@ STRUCTURE DU CABINET JUMBO FWC-CAB4.2 Suspension du cabinet - Assemblezlessupports ä plateau(E) ä votre plateau Flow Wall ä l'endroit oü vous souhaitezsuspendrevotre cabinet. Suspendezle cabinet aux supports Etape 5. plateau (E). Apræsla suspension, l e cabinet peut atre ajusté cate cate en glissantl'...
- Page 15 Manual de Instrucciones y Ensamble FLOWWALL@ ESTRUCTURA DEL GABINETE GIGANTE Modelo: FWC-CAB4.2 FLOW WALL' 1891 W 2100 S 1891 2100 Salt Lake City, UT 84119 Salt Lake City, UT 84119 (877)-203-5974 (877)-203-5974 customerservice@flowwall.com customerservice@flowwall.com...
- Page 16 LISTADEPARTS ESTRUCTURAS DEL GABINETE ALTAS FWC-CAB4.2 DESCRIPTCIÖN IMAGE CANT. Leva y perno Tarugos Llave de acero Tornillo para llave Soporte para llave Panelsuperior e inferior del gabinete Panel lateral...
- Page 17 FLOW WALLO ESTRUCTURA DEL GABINETE GIGANTE FWC-CAB4.2 Coloque los postes: Atornille los postes(A) en los orificios de recepci6n que se Paso 1. encuentranen la parte superior e inferior del panel (F).
- Page 18 FLOWWALL@ ESTRUCTURA DEL GABINETE GIGANTE FWC-CAB4.2 Panel lateral: Peguee insertelos tarugos (B) en el panel lateral(G) Paso 2. (el pegamento es opcional) EL PEGAMENTO ES OPCIONAL...
- Page 19 FLOW WALC ESTRUCTURA DEL GABINETE GIGANTE FWC-CAB4.2 Conectar Paneles: Una los panelesinferior y superior (G) a los paneleslaterales(F). Paso 3. Insertelaslevas(A) en los orificios de los laterales.Deslice,simulténeamente, l os paneles superiore inferior.Ajuste las levas.
- Page 20 FLOWWALL@ ESTRUCTURA DEL GABINETE GIGANTE FWC-CAB4.2 Llave de acero - Ensamblelos llavesde acero (C) en su gabinete utilazandolos tornillos Paso 4. para llave(D).
- Page 21 FLOWWALL@ ESTRUCTURA DEL GABINETE GIGANTE FWC-CAB4.2 C6mo colgar el gabinete - Ensamblelos soportespara llave(E) en su panel Flow Wall en el lugar donde le gustar(acolocar su gabinete.Cuelgue el gabinete en los soportes Paso 5. para llave(E). Una vez colgado, el gabinete puede ajustarsede lado a lado, deslizando la carcasay los soportes.