KITCHEN CREW 940590 Mode D'emploi page 27

Overloading can result in
damages.
• Protect the device from
environmental influences
such as insects, dust and
humidity to prevent short
circuits or other errors. If
the device is not being
used for a long time, store
it in its original packaging
and clean it before the
next use.
• Do not move the device
as long as cookware is
placed on top of it.
• Prevent direct contact
with sharp objects which
could damage the plate.
Should the surface be
Electrical Safety
Warning! Danger of electric shock.
In case of service work, this product may only be
opened by a qualified technician.
• If problems occur, imme-
diately disconnect the
device from the power
supply and other devices.
• Do not operate the de-
vice if the power cord or
main connection is da-
maged or defect. Should
the main plug or power
damaged, switch off the
device immediately and
have it repaired by a qua-
lified technician.
• Clean the plate before
each use and check the
ventilation slots to ensure
proper functioning.
• Be aware of hot parts!
Wait until the device
has cooled down befo-
re touching it with your
hands. The surface gets
hot during use and may
contain increased residual
heat due to the hot cook-
ware even if the device is
already switched off.
adapter be damaged or
defect, the main plug or
power adapter must be
replaced by the manu-
facturer or an authorized
service partner.
• Before operating the
device, always make sure
that the supply voltage is
27