Weber Rescue Systems BC 250 MK2 Mode D'emploi page 69

We hereby declare, based on our sole responsibility, that our "Hydraulic rescue Equipment"
DRIVE UNIT
SPREADERS
CUTTERS/COMBI-TOOLS
RAMS
SPECIAL TOOLS
ACCESSORIES
meets the relevant basic safety and health requirements of the directive:
EC-MACHINE DIRECTIVE 2006/42/EC
EC-LOW VOLTAGE DIRECTIVE 2014/35/EC
EC-ELECTROMAGNETIC COMPATIBILITY DIRECTIVE 2014/30/EU
EC-DIRECTIVE RoHS 2011/65/EU
EC-RADIO EQUIPMENT DIRECTIVE 2014/53/EU
For the relevant implementation of the safety and health requirements mentioned in these directives, the
following standards and/or technical specifications has been respected:
EN 13204 : 2025
NFPA 1960 : 2024
EN 61508-1 : 2011
IEC 62443 : 2020
ETSI EN 301 489-17 V3.2.4
ETSI EN 301 893 V2.1.1 : 2017-05
EN 300 328 V2.2.2 : 2019-07
DIN EN IEC 62311 : 2020-12
ETSI EN 300 440 v 2.2.1 : 2018-07
The tools are tested according to EN 13204 and NFPA 1960
The notified body TÜV SÜD Product Service GmbH, identification number: 0123, has carried out an EU type
examination for RED 2014/53/EU Article 3.1a, 3.1b and 3.2 and issued the type examination certificate
No. TPS-RED500645 i02.
Authorised person to compile the technical file(s): Josef Eder Head of Development
i.A. Alexander Jauker
(Head of Productmanagement)
DECLARATION OF CONFORMITY
according to Directive 2006/42/EC
S-FORCE (1098895)
SP 44 AS S-FORCE, SP 50 BS S-FORCE, SP 54 AS S-FORCE, SP 60 BS S-FORCE
RSC 60 FX S-FORCE, RSC 170 (PLUS) S-FORCE, RSC 190 (PLUS) S-FORCE,
RSC 200 (PLUS) S-FORCE, RSC F7 S-FORCE,
RIT-TOOL S-FORCE, SPS 270 MK2 S-FORCE, SPS 360 MK2 S-FORCE,
SPS 370 MK2 S-FORCE, SPS 400 MK2 S-FORCE, SPS 480 MK2 S-FORCE
RZ 1-910 S-FORCE, RZT 2-1170 S-FORCE, RZT 2-1360 S-FORCE,
RZT 2-1500 S-FORCE
BC 250 MK2 S-FORCE, SPK 250 MK2 S-FORCE,
DO 140 MK2 S-FORCE, DO 260 MK2 S-FORCE, C 120 MK2 S-FORCE
and accessories to all tools
EN 61000-6-1 : 2019
EN 61000-6-2 : 2019
EN 61000-6-3 : 2006 + A1:2010
EN 61000-6-4 : 2019
EN60529 : 1991 + A1 : 2000 + A2 : 2014
ETSI EN 301 489-19 V2.1.1
ETSI EN 301 511 V12.5.1 : 2017-03
ETSI EN 303 413 V1.2.1
Losenstein, 21.10.2025
DÉCLARATION DE CONFORMITÉ CE | 69
WEBER-HYDRAULIK GMBH
Emil Weber Platz 1, 4460 Losenstein, Austria
EN ISO 13857 : 2019
EN ISO 12100 : 2010
EN ISO 13849-1 : 2008
IEC 82079-1 : 2021
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-52 V1.1.0
ETSI EN 301 908-1 V15.1.1
ETSI EN 301 908-13 V13.2.1
i. V. Josef Eder
(Head of Development)