Installation Procedure - Neorest YB990 Manuel D'installation Et D'utilisation

installation proCEDurEs
YB990 Bath Towel Holder
YC990 Hand Towel Holder
1. hold the body against the wall
and mark drill points. open 1/4"
(6mm) in diameter., over 1-1/"
(40mm) deep holes for the wall
anchor
. Drill wall holes for the provided
wall anchors. hold the front long
driver to mount the body on the
wall with flat head wall screws to
fix the body. Avoid scarring the
body with tools
3. install the cover from below the
body. secure cover with provided
hex wrench and cover screws.
•
Wall screw position
〈YC990〉
6" 6"
(150mm) (150mm)
〈YB990〉
6" 6"
(150mm) (150mm)
Wall anchor
Flat Head Wall screw
<Front>
Cover screw
4
6"
(150mm)
Wall hole
Cover