Lorell 59611 Instructions D'assemblage

Assembly Instructions
Frame Desktop Screw
connector connector 4 pcs
4 pcs 4 pcs
Already fixed on
the wood leg
STEP I
a
a
Use RUBBER mallet to Put screws D in position,
knock A into tube. and do not tighten.
STEP 3 (For 72" Table top)
STEP 3 (For 60" Table top)
180
IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to make sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packaging straps before you start to assemble.
• Do not tighten all screws/bolts
• Keep all hardware parts out of children's reach.
• It is recommended for 2 persons to complete
Table Top 59611/59612/16223,
M8*45 Screw Adjustable
M8*12 Glide
12 + 2 extra pcs 4 pcs
Already fixed on
the wood leg
b
b
180
Put the frame at center position.
180 180
Put the frame at center position.
until pieces are completely assembled.
this assembly.
59613/59614/59656,
Adjustable Frame for 24" Desk 16244
Screw Screw Holder 6# Allen Key
ST5.5*20 ø16*60
36 + 4 extra pcs
STEP
c
b
Loose screw C before
assembling legs and frame.
d
180
59615/59616/16222
5# Allen Key
2
c
Please ensure
big hole is on top.
c
Ensure all 36 pcs screw F are in position, then tighten screw F.
Ensure all 36 pcs screw F are in position, then tighten screw F.
Meeting Table
d
Tighten 4 screws C,
then tighten 8 screws D.
h
Two PEOPLE ARE REQUIRED TO
ASSEMBLE ANO MOVE THIS MODEL