Publicité
Les langues disponibles
Les langues disponibles
DANZE ALWAYS RECOMMENDS THAT PLUMBING PRODUCTS BE INSTALLED BY A LICENSED PROFESSIONAL.
Danze 3/4'' Volume Control Valve Extension kit is designed to provide an additional
13/16'' wall depth. If the back of volume control valve is more than 4 1/4'' (108 mm)
away from the finished wall surface, you need to use the extension kit.
1.
Remove the plaster guard from the 3/4" volume control valve.
2.
Close water supply valves located on either side of the thermostatic mixing
valve body (turn clockwise to close).
3.
With a socket wrench of H 13/16" (H 20 mm) and at least 2 3/4" (70 mm) in depth,
remove the on/off valve cartridge from the body. (rotate out counterclockwise).
2
Operation Manual
© 2008 Danze, Inc. All rights reserved.
®
Publicité
