Use Only As Authorized; Handle Fuel Safely - holzkraft HWS 720 K Traduction Des Instructions D'origine

3. Use only as authorized

The firewood circular saw is designed exclusively with the offered tool for the processing of wood.
The machine corresponds to the valid EC guideline.
• The log saw is constructed as 1-man-operating stand and is only to be used in outdoor locations.
• The log saw is a portable circular saw. It is only applicable to cross cut firewood with a feeding rocker according to the technical
specifications.
• The saw is constructed solely for cross cutting of firewood with max. 1 meter length.
• Regardless of the diameter of the wood only 1 work piece is to be put on the rocker.
• Observe all safety and hazard notes on the machine and ensure they are kept complete and in a legible condition.
• The machining range and surrounding areas of the machine must be clear of interfering foreign matter to prevent accidents occurring.
• Workpieces must be completely free of foreign objects, i.e. nails or screws.
• The machine must only be used in technically perfect condition in accordance with its designated use and the instructions set out
in the operating manual, and only by safety-conscious persons who are fully aware of the risks involved in operating the machine.
Any functional disorders, especially those affecting the safety of the machine, should therefore be rectified immediately.
• The manufacturer's safety instructions, operating instructions and maintenance instructions as well as the dimensions given in
the technical data must be observed.
• The applicable accident prevention regulations and other generally accepted safety regulations must be complied with.
• The machine may only be used, maintained, and operated by persons familiar with it and instructed in its operation and proce-
dures. Arbitrary alterations to the machine release the manufacturer from all responsibility for any resulting damages.
• The machine may only be used with original accessories and original tools made by the manufacturer.
• Any other use exceeds authorization. The manufacturer is not responsible for any damages resulting from unauthorized use; risk
is the sole responsibility of the operator.
• Only use saw blades that comply with the European standard DIN EN 847-1.
• Ensure adequate lighting.
• Make sure that the machine is secure on the ground when installing the machine.
• The area around the machine must be free of trip hazards.
• The machine may only be operated outdoors without exhaust.

4. Handle Fuel Safely

• To avoid personal injury or property damage, take extra care when handling fuel.
• Fuel is highly flammable, the vapours are explosive.
• Avoid smoking cigarettes, cigars or pipes in working area and remove all possible sources of ignition.
• Use only approved fuel containers.
• Never open the filler cap or fill in with fuel while the engine is running.
• The engine must be cooled before fuel is poured in.
• Never refuel the machine indoors.
• Never store the machine or the fuel tank near open flames or potential ignition sources.
• Never fill the fuel tank inside a vehicle, on a truck or a trailer with cover.
• Always fill up the tank on solid ground at a safe distance from the vehicle.
• Should fuel be sprayed on your clothes, take off the clothes immediately.
• Do not overfill the fuel tank.
• Close the fuel tank carefully.
• If the fuel tank must be drained, this should be done outdoors
• Never transport the saw while the engine is running.
• Never refuel the machine in confined spaces.
• Before turning on the engine you need to clean the tank and the machine from gasoline residues.
• Heated gas expands. Do not fill the fuel tank to the edge, but leave a little space so that hot gas can expand.
• The fuel cap has a ventilation slot for the discharge of gasoline vapours.
• Always use an original gas cap.
• Failure to observe the gasoline safety can cause fires and explosions; they can cause serious injuries as well as damage the
equipment and property of others.
• The filling of fuel into a running or hot engine can cause an explosion.
• Before refuelling, always switch off the engine and let it cool for a few minutes.
• Remove wood shavings and other debris from the machine. Keep the machine clean, so you can increase its performance.
• Engine, transmission and muffler will be very hot when the engine running in a matter of minutes. In any case touch these equip-
ment parts.
• Before servicing the unit, you must first turn off the engine and allow the engine and transmission to cool.
• Remember, exhaust vapours are dangerous. Never turn on the machine in a confined space.
• Dispose of used engine oil in accordance with the customary rules.
• Turn off the engine immediately if you notice unusual noises or vibrations.
• Unusual noises or vibrations are usually warnings of major problems.
GB
page: 21