DeWalt DXCMTA5090412 Guide D'utilisation page 17

What the Company Will Do: (the company) will cover parts
and labor to remedy substantial defects due to materials
and workmanship during the first year of ownership, with the
exceptions noted below. Parts used in repair of whole goods or
accessories are warranted for the balance of the original warranty
period.
What is not covered Under This Warranty? Failures by the
original retail purchaser to install, maintain, and operate said
equipment in accordance with standard industry practices.
Modifications to the product, or tampering with components,
or failure to comply with the specific recommendations of the
Company set forth in the owner's manual, will render this warranty
null and void. The Company shall not be liable for any repairs,
replacements, or adjustments to the equipment, or any costs for
labor performed by the purchaser without the Company's prior
written approval. The effects of corrosion, erosion, surrounding
environmental conditions, cosmetic defects, and routine
maintenance items, are specifically excluded from this warranty.
Routine maintenance items such as: oil, lubricants, and air filters,
as well as changing oil, air filters, belt tensioning, etc... fall under
the owner's responsibility. Additional exclusions include: freight
damage, failures resulting from neglect, accident, or abuse,
induction motors when operated from a generator, oil leaks, air
leaks, oil consumption, leaky fittings, hoses, petcocks, bleeder
tubes, and transfer tubes.
• The following components are considered normal wear
items and are not covered after the first year of
ownership: Belts, sheaves, flywheels, check valves,
pressure switches, air unloaders, throttle controls,
electric motors, brushes, regulators, o-rings, pressure
gauges, tubing, piping, fittings, fasteners, wheels, quick
couplers, gaskets, seals, air filter housings, piston rings,
connecting rods, and piston seals.
• Labor, service calls, and travel charges, are not covered
after the first year of ownership on stationary
compressors (compressors without handles, or wheels).
Repairs requiring overtime, weekend rates, or any other
charges beyond the standard shop labor rate are not
covered.
• Time required for orientation training for the service
center to gain access to the product, or additional time
due to inadequate egress.
• Damage caused from inadequate filter maintenance.
• Pump wear or damage caused by any oil contamination.
• Pump wear or valve damage caused by failure to follow
proper maintenance guidelines.
• Gas Engines, if product is equipped with a gas engine,
see engine manual for specific engine manufacturer's
warranty coverage.
Parts purchased separately: The warranty for parts purchased
separately such as: pumps, motors, etc., are as follows:
From Date of Purchase
• All single & two stage pumps
• Electric motors
• Universal motor/pump
• All other parts
• No return authorization will be issued for electrical
components once items are installed.
How do You Get Service? In order to be eligible for service
under this warranty you must be the original retail purchaser,
17
1 year
90 days
30 days
30 days