Important Safety Instructions - Ryobi P3100 Manuel D'utilisation

WARNING
READ ALL INSTRUCTIONS. Failure to follow the warn-
ings and instructions may result in electric shock, fire
and/or serious injury.
 Know your product. Read operator's manual carefully.
Learn its applications and limitations, as well as the
specific potential hazards related to this product.
Following this rule will reduce the risk of electric shock,
fire, or serious injury.
 Always wear eye protection with side shields marked
to comply with ANSI Z87.1 when assembling parts,
operating the product, or performing maintenance.
Following this rule will reduce the risk of serious personal
injury.
 Do not lay a hot soldering iron on its side.
 Do not touch the heated tip of the soldering iron.
 Use the soldering iron in a well-ventilated area to avoid
breathing fumes.
 Do not point the tip of the soldering iron at another
person.
 Do not place your hands or fingers near the tip of the
soldering iron.
 Never leave the soldering iron unattended while it is
in the on position.
 Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
 Do not operate battery products in explosive atmo-
spheres, such as in the presence of flammable liquids,
gases or dust. Battery products create sparks which may
ignite the dust or fumes.
 Keep children and bystanders away while operating
this soldering iron. Distractions can cause you to lose
control.
 Do not allow children to use the soldering iron. It is
not a toy.
 Always assume that the soldering iron tip is hot.
 Do not solder live circuits.
 Do not disassemble the tool.
 The soldering iron tip is sharp. Do not touch the tip
or allow it to come in contact with anything other than
soldering wire and the workpiece material.

IMPORTANT SAFETY INSTRUCTIONS

 Hold soldering iron by insulated gripping surfaces,
when performing an operation where the tip may
contact hidden wiring. Tips contacting a "live" wire may
make exposed metal parts of the soldering iron "live" and
could give the operator an electric shock.
 Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
 Do not expose soldering station to rain. Water entering
a power tool will increase the risk of electric shock or
malfunction. These fluids can cause battery pack failure
including short-circuit resulting in smoking, fire and/or
serious personal injury.
 To reduce the risk of electrical shock, do not put tool
or charger in water or other liquid. Do not place or store
appliance where it can fall or be pulled into a tub or sink.
 Use this product only with batteries and chargers list-
ed in tool/appliance/battery pack/charger correlation
supplement 987000-432.
 Stay alert, watch what you are doing and use common
sense when operating a battery product. Do not use
the product while you are tired or under the influence
of drugs, alcohol or medication. A moment of inatten-
tion while operating battery products may result in serious
personal injury.
 Prevent unintentional starting. Ensure the switch is
in the off position before connecting to power source
and/or battery pack, picking up or carrying the prod-
uct. Carrying battery products with your finger on the
switch or energizing battery products that have the switch
on invites accidents.
 Do not overreach. Keep proper footing and balance
at all times. Do not use on a ladder or unstable sup-
port. This enables better control of the battery product
in unexpected situations.
 Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can contact a
heated nozzle.
 Do not use the battery product if the switch does
not turn it on and off. Any battery product that cannot
be controlled with the switch is dangerous and must be
repaired.
 Remove the battery pack from the product before
making any adjustments, changing accessories, or
2 — English