Publicité
Les langues disponibles
Les langues disponibles
The fans are in-line mixed type fans designed for
extract ventilation of rooms heated in winter time.
are made of white plastic.
Delivery set includes:
1. Fan - 1;
2. Screws with plugs - 4;
3. User's manual;
4. Packing box.
Fans are compatible with 3 15/16" (
100
4
15/16"
(125
mm
), 5
7/8"
(150
mm 6 5/16"
),
7 7/8"
(200
mm diameter ducts.
)
" " models
S
are equipped with higher-power
Fans are supplied with an internal three-position
speed switch (fig. 3), which provides fan operation in
three different function modes:
"0"– turned off, the fan is not operating;
"I" – the fan is operating at minimum speed;
"II" – the fan is operating at maximum speed.
Fans may be mounted either vertically or horizontally
(fig. 1). Fans may be used either separately or as part of
a set for parallel or
in-line
mounting (fig. 2). Parts that
come with connecting units are delivered separately.
An air duct at least 40 inches (1 meter) long should be
connected to an inlet flange in case of horizontal fan
mounting; a canopy should be installed on an inlet flange
in case of vertical mounting. Outlet flange should always
be connected to an air duct. M unting is
o
Fig.
4-1 . Air motion must coincide with direction of i
2
ndicator on the fan case.
Input: 120V AC 60Hz.
Scheme of fan connection to the
power network is shown on Fig. 3.
Fans are designed for
continuous operation without disconnection from network.
Protection rating from access to dangerous parts and
water penetration is
IPX4.
Fans can be operated at
ambien temperatures between
t
+37 ° F
and
(for the details, please, see the manufacturer's catalog).
Fan construction is constantly being improved, that is
why some models can differ slightly from those described
in this manual models.
Fan surfaces need to be cleaned
Fans
regularly by using a soft, wet cloth and mild detergent
(Fig. 13-18).
Do not allow liquids to come in contact with the
electric motor. Wipe surfaces dry after cleaning.
mm
),
(160
mm
),
motor
.
Recylcle at the end of unit's
service l
Do not dispose of with other trash.
WARRANTY
Production meets standard
requirements in
the territory of the USA and Canada.
Manufacturer guarantees normal operation of the
unit
for
60 months from the da
the
compliance with
and operation rules.
If
proof
of sales date is absent, warranty period is
calculated from the
In case of
failure due to faulty equipment
shown on
warranty period
, the
exchange
it.
The unit can be exchanged at
address:
Bodor Vents, LLC
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: (513)348-3853
e-mail: bodorvents@cinci.rr.com
+107 ° F
Manufacturer is not responsible for damages
resulting from
misuse of the unit or gross
mechanical
alteration
Owner of the unit must follow the
forth in the
manual.
of dirt and dust
ife.
operating
te
of
resale,
subject to
transport, storage, mounting
production date
.
consumer has the right to
the following
.
guidelines set
Publicité
