Other; Maintenance; Storage And Transport; Decommissioning/Disposal - hawa Powerlec Vario Manuel D'utilisation

9. Other

9.1 Maintenance

Use only original parts from häwa GmbH for replacement or exchange.
Visual inspection advisable before each use.
Ensure that the punching device is cleaned after every use and stored in a dry place. The battery and charger should also be protected against moisture
and foreign objects.
The device is basically maintenance-free. Only the bolt connections at the punching head and the moving components of the punching head should be
oiled.
To ensure proper functioning of the device and to prevent possible malfunction, the punching device should at the end of each year or after 10,000
punches go for maintenance or service.
In the context of its intended use, only the punching inserts and batteries may be changed by the customer.
Caution: Do not damage any of the seals!
Any damages to the seals of the device voids the warranty.

9.2 Storage and transport

To protect the punching device against damage, it should be cleaned after each use and stored away in the carrying case, preferable locked away safely.

9.3 Decommissioning/disposal

Even high quality devices have a certain lifespan, where at some point the device must be disposed of.
The disposal of all individual components of the punching device must be done separately. The oil must first be drained and disposed of at special collec-
tion points.
Caution: Unlawfull draining or improper disposal is subject to punishment. (Environmental liability Act)
Caution: Batteries contains dangerous substances for the environment. Every consumer is therefore obliged to follow the battery disposal
regulations of used batteries at a collection point for disposal. Disposal of batteries in household waste is prohibited!
If the battery can not be disposed of at a public collection point, it can be send to the distributor or to häwa
for free disposal.
When disposing of the remaining parts of the device, please refer to the EC environmental standards.
It is recommended leaving the disposal to professional companies.
Cost free return of the device for disposal to the manufacturer can not be guaranteed.
21