Back Panel - Eden E-Uke Guide De Démarrage

1. Input - Connect your instrument here.
2. Volume - Controls the volume level of your
amplifier.
3. EQ Sweep - EDEN tailored EQ modifier adjust
this to adjust your overall EQ shaping.
4. Tone - Set at 12 O'clock this EQ provides a
perfect flat EQ setting turning to the left boosts
the lower frequencies while turning to the right
increases the high frequencies.
5. Phones - Insert standard headphones here for
silent practice.
6. Stereo Media Input - Connect your MP3 / CD
player or other device here using a 3.5mm jack
plug.
7. Power - Switch your unit off or on using this
switch.
unit diagrams (Continued)

back panel

CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.
RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
Designed, Engineered and Quality
Controlled by EDEN USA
Manufactured in China
Power
On
7
Off
100v 120v 220v 230v 240v
50/60 Hz ~ Type Amp 250v Fuse
45 Watts Maximum
RoHS
PB
RISK OF FIRE - REPLACE ONLY
WITH SAME TYPE FUSE
Quick Start Guide | E-Uke
7