Garbage Disposal; Requesting Spare Parts; General Product Information - Technodom EW 961 Manuel D'installation

5.5 CONDENSER'S BUILT -IN UNIT CLEANING
For explanation see the chapter "3 CLEANING" Pag. 32.
5.6 COUNTER WITH ELECTRIC DEFROSTING

5.7 GARBAGE DISPOSAL

Plastic, gaskets, sheet metal, polyurethane components, panel controls and electric material in general must be
saved and/or dumped in public dumps and/or garbage authorized centre.
Be sure not to disperse.
Save the refrigerating gas and oil in special tanks, do not dispose of them in the sewage system but dump them
in according to your local laws.

5.8 REQUESTING SPARE PARTS

After verifying the problem with a specialized technician, When requesting spare parts, after please say clearly :
• Model of the item.
• Serial number of the item.
• Motivation of the request of support.
• Quantity of the spare part.
Possibly, enclose also a picture of the part to be ordered.

General product information:

code HORjkz (identification of single particular code of the
family HOR - Horizontal refrigerators)
"HOR" TYPE OF PRODUCT
possible options
HOR = Horizontal refrigerators
"j" Doors (Number od doors) of EUT
possible options
001P = 1 door
002P = 2 doors
Pizza Refrigerated Counters | User and Maintenance Manual | EN
Before proceeding with this operation, it is necessary to unplug the unit or to
open the divider placed on the top of the refrigerated counter connection.
If the Counter has electric defrost, avoid touching the heating element of units fitted with
electric defrosting, as they may still be hot after defrosting cycle. Wait until it cools off, then
proceed with maintenance and cleaning operations.
003P = 3 doors
004P = 4 doors
"k" additional configuration of EUT
possible options
S = without motor (compresser)
C = with motor (compresser)
"z" configurazione supplementare dell' EUT
possible options
W = with electrical defrost (resistance)
Y = Stopping defrost (compresser turn off)
37