D-Link ShareCenter Pro 1200 Guide D'installation page 7

4. Coniguration with Wizard
When irst powered on, during the initial boot sequence, the ShareCenter will wait
to be assigned an IP address via DHCP. If it does not receive a DHCP assigned IP
address, by default it will have a self-assigned IP address in the range of 169.254.0.0
to 169.254.255.255. It is recommended to use the included D-Link Easy Search Utility
when accessing and coniguring the ShareCenter for the irst time. If you want to
change the IP address before logging in or are unable to connect to the ShareCenter IP
address, you can use the Easy Search Utility provided on the product CD to locate the
device on your network and make any needed changes.
¡ ¢ £ ¤ ¥ ¦ § ¢ ¤ ¥ ¨ © ¡
Device
Refresh
Coniguration
LAN
Apply
iSCSI Drive
Mapping
Connect
Management
Drive Mapping
Available Drive
Letters
About
Exit
D-Link DNS-1200-05 Quick Installation Guide
Easy Search Utility
The Easy Search Utility
displays any ShareCenter
devices it detects on the
network here.
Click Refresh to refresh the
device list.
Click Coniguration to access
the Web based coniguration
of the ShareCenter.
Conigure the LAN Settings
for the ShareCenter here.
Click Apply to save changes
to the LAN Settings.
Displays the available iSCSI
targets on ShareCenter.
Click Connect to connect to
the iSCSI target.
Click Management to edit the
information.
Volumes available for mapping are displayed here.
Choose an available drive letter. Click Connect to map the selected volume.
Click Disconnect to disconnect the selected mapped volume.
Click About to view the software version of the Easy Search Utility.
Click Exit to close the utility.
7